Smaller, Lighter and Faster – The Turbosmart TS-1 turbocharger series has been developed to leverage modern materials, design and manufacturing techniques to create a Turbocharger range that meets the demands of both Motorsport, and performance enthusiasts alike.
The TS-1 series are oil cooled turbochargers with lightweight stainless steel investment cast turbine housings, a proprietary bearing and main shaft combination which will provide transient response you never knew possible with the type of performance, quality, reliability and support you’ve come to know Turbosmart for.
The ultra-low rotating mass of our unique bearing and shaft assembly is matched to aggressive compressor aerodynamics to ensure high levels of performance at lower shaft speeds which is mated with a unique T14 Inconel turbine wheel to ensure power at high loads and flow is maintained.
The TS-1 turbocharger series has taken a ‘whole of engine’ approach to increasing performance, aiming to achieve power through reduced back pressure and high performance turbines – while being smaller, lighter and faster in response than other solutions on the market.
Features
Unparalleled transient response
Aggressive aerodynamics with 7+7 splitter wheels
Lightweight 310s stainless steel investment cast turbine housings
Lightweight, Aluminium compressor covers
CFD driven designed housings for optimal AR’s and flow
T14 Inconel turbine wheel for extreme EGT’s
VSR speed balanced
Proprietary dual ceramic bearing system
Integrated Iron backplate on center housing
Specifications
Compressor Inlet: 4″ / 101.6mm
Compressor Inducer: 62mm
Turbine Inlet: V-Band (2.25″)
Turbine Exducer: 62mm
Turbine AR: 0.82
Turbine Outlet: V-Band (3.00″)
Weight: 6.06kg / 13.3lbs
TS-1-6262VR082E

Gasket - T3 (T3/T4) exhaust housing inlet
4G63 Turbo dump pipe EVO 7-9 Kinugawa
Yellowspeed Brake Kit 356mm 4-pot (18") Rear
Yellowspeed Brake Kit 380mm 8-pot (19") Front
4G63 Turbo dump pipe EVO 4-6 Kinugawa
Oil feed and return kit Toyota CT9 CT12 CT20 CT26 10AN
Banjo bolt M12x1.5 (Oil feed)
Turbo oil and water line kit Nissan S15 T28 BB Kinugawa (Top Mount Turbo)
DPR T3T4 turbo oil return flange (hose tail)
Turbo oil feed kit TD05/TD06 EVO 4-9 oil filter housing type - Kinugawa
Kinugawa Japan 20G upgrade kit for EVO 1-3 TD05
Gasket - T4 exhaust housing inlet twin entry
Clutch kit Toyota ST215w Caldina OEM spec
Gasket - T25 T28 exhaust housing inlet
Kinugawa Japan 20G upgrade kit for EVO 1-3 TD05 w/ Actuator
Motul oil 4100 Power 15W50 4L
Kinugawa Japan TD04-15T 4cm 3-bolt 4D56T Pajero upgrade
D2 Racing coilovers - super street series
Gasket - T25 T28 exhaust housing outlet
Kinugawa Japan TD04HL-20T GTX Legacy BP5 / BL5 twin scroll upgrade turbo
SD Rod End (alloy, imperial) R/L
Turbo oil feed kit BA / BF Falcon XR6 turbo
V-band flange and clamp set (4.00")
Stainless Steel T-bolt clamp (to suit 4.50" hose)
Turbo oil feed fitting M10x1 -4AN Kinugawa
Short shifter - Subaru WRX / Legacy 2002 up
Banjo fitting M16x1.5 to -6AN
Turbo oil return fitting kit TD04 TD05 TD06 Kinugawa onepiece
Kinugawa Japan CT26 3SGTE SW20 ST185 60-1 upgrade kit 