These banjo fittings come complete with banjo bolt and crush washers. They suit oil feed lines on turbos that use a 7/16 oil feed thread (such as Garrett). The banjo bolt is 7/16″ and the fitting takes a DASH4 connector. Suitable for use on ball bearing turbos as they come with built in restrictor. 1.0mm restrictor.

Hybrid GT2 spec intercooler kit - WRX (GRF)
Clutch kit Toyota ST215w Caldina Sports Ceramic 3 Puk
Lucas SAE30 Break In Oil 4.7L
BC Camshafts B16a B18c stage 2 / 2+ / 3
DPR Intercooler V-mount for FD RX7
Stainless Steel T-bolt clamp (to suit 4.50" hose)
Motul Brake Fluid RBF600 - 500ml
Lucas 75w90 Synthetic Gear Oil 4.7L (trans and diff)
Turbo oil feed kit Subaru TD05H TD06 AVCS KIT
Lucas Ethanol Fuel Conditioner 473mm
Kinugawa Japan 20G upgrade kit for EVO 1-3 TD05 w/ Actuator
BC Camshafts 4G63 EVO 1-3 stage 2 / 3 / 4
Y-splitter fitting with -6AN ports
Air filter adaptor Simota PA10
Hybrid X01-R intercooler kit - Toyota Starlet
BC Camshafts EJ20 stage 2 / 3
TRD Limited Slip Differential (all models)
Motul 90 PA LSD gear oil - 2L
Air filter adaptor Simota PA7
Turbosmart Vee-Port Pro BOV Subaru fitment
Turbo oil feed fitting M10x1.25 -4AN Kinugawa
Oil feed and return kit Toyota CT9 CT12 CT20 CT26 10AN 