These banjo fittings come complete with banjo bolt and crush washers. They suit oil feed lines on turbos that use a 7/16 oil feed thread (such as Garrett). The banjo bolt is 7/16″ and the fitting takes a DASH4 connector. Suitable for use on ball bearing turbos as they come with built in restrictor. 1.0mm restrictor.

Turbosmart Kompact Plumb-Back BOV - Nissan
Stainless Steel T-bolt clamp (to suit 1.50" hose)
Oil feed and return kit Toyota CT9 CT12 CT20 CT26 10AN
Turbo oil and water line kit Nissan RB25DET / RB30 with GT3582r turbo
Bosch 850cc injectors set (6) high impedence
SSQV flange for EJ20 / EJ25 (type 3) Subaru - bolt on WRX 2008-2014
V-band clamp single (4.00") 