These Malpassi / FSE fuel pressure regulators are designed for use in EFI vehicles, both factory standard and modified. With this particular model, fuel pressure increases at the rate of 1.7:1 with manifold pressure (or boost). This means you will get a much richer top end than the factory fuel pressure regulator or most aftermarket regulators offer. In some instances this may mean re-tuning or re-chipping to make use of this extra fuel.

Bosch 650cc injectors set (4) high impedence
Turbo oil feed fitting M12x1.25 -4AN Kinugawa
Denso Kinugawa 565cc injector set (4) GDA GDB
DPR 700 external fuel pump
Bosch 850cc injectors set (6) high impedence
V-band clamp and flange 3" - suit Kinugawa turbos
DPR fuel filter with -6AN inlet and outlet
Speedo Cluster Overlay (real carbon) Lancer 96-00
DPR S13 R32 A31 Z32 rear camber arms
Oil feed and return kit Toyota CT9 CT12 CT20 CT26 10AN
Banjo bolt 7/16 (ball bearing oil feed)
Banjo fitting M16x1.5 to -6AN
Hybrid GT2 spec intercooler kit - S13 CA18
RAGE exhaust system - Ford Falcon BA BF XR6 turbo
DPR wheel spacers 15mm 4x114.3 Nissan (pair)
Wastegate dump pipe (screamer pipe) 50mm 