Yellowspeed Racing produce a wide range of ultra high quality high performance brake kits ranging from a small 4-pot caliper to a large 8-pot one. Rotor size can range from a modest 286mm up to a monster 405mm diameter. Each Yellowspeed kit is custom assembled to order and takes around 2 weeks to arrive.
FORGED CALIPER
The caliper is made from lightweight alloy aluminum for weight reduction and optimal strength. The caliper utilizes piston dust/dirt and oil-leaking resistance seals, and is covered with anti-rust coating available in many colors. The narrow shape is specifically developed to enable fit in a large range of vehicles with wheels as small as 15″.
1-PIECE, DRILLED or SLOTTED BRAKE ROTOR
Designed and developed through extensive motorsport testing the Yellowspeed Racing brake rotor designs offer better high heat transfer qualities, fade less and resist distortion on the track. They posess a unique larger vane design for more air flow to enable greater dissipate of heat. The rotors are made from high level of alloy cast iron. The rotors are available as drilled or slotted for the same cost (please specify when ordering). 2-Piece rotors also available in some sizes at an additional cost.
PAD OPTIONS
1) HIGH PERFORMANCE SPORT COMPOUND BRAKE PADS: These are specially formulated brake pads for street vehicle brake upgrade presenting optimum stopping performance. In addition, they produce low dust, low rotor wear rates and reduce noise. They are rated for use between 0 and 500 degrees C and have ab average coefficient of friction of 0.35-0.45.
2) COMPETITION COMPOUND BRAKE PADS:
These are specially formulated brake pads for high speed or track use presenting optimum stopping performance with excellent controllability and resistant to heat. They are suited to use up to 550 degrees C with an average coefficient of friction of 0.38-0.50. They are a Material Ceramic compound.
INCLUDED IN THE KIT
2 x Forged billet aluminum calipers with anti-rust coating.
2 x Two piece, drilled or slotted rotors with lightweight aluminum centre bells. Rigid steel centre bells are equipped for the rear rotors integrated with inner drums.
4 x High Performance Sport Compound Brake Pads (Competition Compound Brake Pads are optional for additional charge).
2 x CNC machined steel caliper mounting brackets
2 x High quality stainless steel braided Teflon brake lines
1 x Hardware tool bag
MAXIMUM ROTOR SIZE VS MINIMUM WHEEL SIZE FITMENT:
15″ rim: 286mm rotor / 4pot / 6pot
16″ rim: 304mm rotor / 4pot / 6pot
17″ rim: 330mm rotor / 6pot
18″ rim: 345mm rotor / 6pot
18″ rim: 356mm rotor / 6pot / 8pot
19″ rim: 380mm / 8pot
20″ rim: 405mm / 8pot
Note – image used in this listing is a sample image only and may not represent the actual vehcile specific kit that you will be sent upon ordering.

SD Rod End (chromolly, imperial) R/L
DPR S13 R32 A31 Z32 rear camber arms
V-band flange and clamp set (2.25")
Lucas Hot Rod and Classic engine oil 4.7L
Kinugawa Japan TD04-12T 4cm 3-bolt 4D56T Pajero upgrade
Turbo oil feed fitting M12x1.25 -4AN Kinugawa
Kinugawa TD05 / TD06 / T67 exhaust housing
4G63 Turbo dump pipe EVO 7-9 Kinugawa
Yellowspeed Brake Kit 380mm 6-pot (19") Rear
Dobi Sport low / super low springs - Half Set (1pair)
Kinugawa Japan TD04HL-20T GTX Legacy BP5 / BL5 twin scroll upgrade turbo
Kinugawa Japan 20G upgrade kit for EVO 1-3 TD05
Kinugawa Japan 20G upgrade kit for EVO 1-3 TD05 w/ Actuator
Flange to suit greddy blow off valves - 34mm
Banjo fitting M14x1.5 to -4AN (Oil feed)
Magnaflow exhaust system - Ford Mustang V8 5L
D2 Racing coilovers - street series
4G63 Turbo dump pipe EVO 4-6 Kinugawa
Turbo oil and water line kit Nissan S15 T28 BB Kinugawa (Top Mount Turbo)
Turbosmart Kompact Plumb-Back BOV - Nissan
PACEMAKER exhaust system - Holden Commodore VF Clubsport 6.0L and 6.2L LS3
Turbo beanie heatshield blanket - Titanium Series (T25 / T28)
SR20 turbo dump pipe S13, S14 T25 atmos venting
Gasket - T3 (T3/T4) exhaust housing inlet
Turbo oil feed kit BA / BF Falcon XR6 turbo
K-sport Sport Spec coilovers
RAGE exhaust system - Ford Falcon BA BF XR6 turbo
Gasket - T4 exhaust housing inlet twin entry
Turbo oil and water line kit EVO 4-9
Oil feed and return kit Toyota CT9 CT12 CT20 CT26 10AN
Kinugawa 4-bolt to v-band exhaust housing adaptor kit V2 - suit garrett bb turbos
PACE MAKER exhaust system - Ford Falcon FG XR6 turbo
Turbo oil feed kit TD05/TD06 EVO 4-9 oil filter housing type - Kinugawa
Toyota ST215w caldina head to manifold gasket
Turbo oil return fitting kit TD04 TD05 TD06 Kinugawa onepiece
Kinugawa Japan CT26 3SGTE SW20 ST185 60-1 upgrade kit
Motul oil 300V Power 0W30 2L
Redline water wetter - coolant 355ml
Kinugawa 3 bolt triangle (trust / greddy / mitsubishi) TD06 gasket set
Lucas Ethanol Fuel Conditioner 473mm
BC Camshafts 3SGTE stage 2 / 3
Motul Brake Fluid DOT 5.1 - 500ml
BC Camshafts VQ35 stage 2 / 3
BC Camshafts 4G63 EVO 9 stage 2 / 3 / 4
DPR Carbon Fibre cold air intake kit - universal