This kit includes a stainless super V-band clamp and two v-band flanges. These are available in a range of sizes. Inside diameter of the flange in this kit measures 2.00″ / 52mm. Flange and clamps are stainless steel construction.
Yellowspeed Brake Kit 405mm 8-pot (20") Front
2 × $3,967.50
BC Camshafts 4G63 EVO 1-3 stage 2 / 3 / 4
1 × $1,092.50
Yellowspeed Brake Kit 380mm 8-pot (19") Front
1 × $3,277.50
Wheel spacer 12.7mm 5 stud multifit (each)
1 × $19.50
Yellowspeed Brake Kit 286mm 4-pot (15") Front
2 × $1,954.99
BC Camshafts 7MGTE stage 2 / 3
1 × $1,562.85
Link G4 storm Engine Management ECU (plug in)
1 × $1,938.90
Hicas lock bar - Nissan S13 R32 A31 C33
1 × $137.99
Turbo oil and water line kit EVO 4-9
1 × $279.99
Bellmouth 3" neck (turbo air intake)
2 × $45.99
Wastegate dump pipe (screamer pipe) 40mm
1 × $68.99
Znoelli s12 Motorsport brake rotor (heat treated)
1 × $0.00
Link G4 storm Engine Management (+ Custom Adaptor)
1 × $1,943.50
Yellowspeed Brake Kit 330mm 6-pot (17") Front
1 × $2,058.49
Turbo install kit EVO 4-9 TD05HR / TD06SL2R w/gaskets
1 × $249.99
GFB D-FORCE diesel boost controller with EGT kit 3007
1 × $639.00
Link G4X AtomX Engine Management ECU (wire in) with loom.
1 × $1,449.99
Yellowspeed Brake Kit 356mm 6-pot (18") Front
1 × $2,328.75
BC Camshafts EJ20 stage 2 / 3
1 × $1,608.85
Yellowspeed Brake Kit 380mm 6-pot (19") Rear
1 × $3,185.50
Kinugawa Japan TD05HR-20g EVO4-9 - BALL BEARING + BILLET
1 × $2,299.00
Y-splitter fitting with -6AN ports
1 × $34.49
Greddy E-manage Ultimate Wiring harness
1 × $333.49
EVO 1-3 and VR4 atmos venting screamer dump pipe
1 × $329.99
Yellowspeed Brake Kit 356mm 6-pot (18") Rear
1 × $2,415.00
Turbo oil return line kit EVO 4-9 Kinugawa
1 × $139.99
Kinugawa T25 T28 compressor cover inlet spacer
1 × $59.99
Hybrid GT2 440 intercooler kit - Falcon BF XR6
1 × $1,279.00
Hybrid Stage 3 intercooler and intake kit- Falcon FG XR6
1 × $2,285.00
Yellowspeed Brake Kit 304mm 6-pot (16") Front
1 × $2,012.50
Yellowspeed Brake Kit 345mm 6-pot (18") Front
1 × $2,299.99
Wheel spacer 9.5mm 4 / 5 stud multifit (each)
1 × $19.50
V-tec controller for Honda Vtec motors
1 × $269.99
Link G4X EVO 1-3 Engine Management ECU (plug in)
1 × $1,948.99
EVO 7-9 atmos venting screamer dump pipe
1 × $429.99
Air filter adaptor alloy Subaru pre 98
1 × $37.94
GFB FX-S FPR liquid filled gauge
2 × $59.99
HDI Hybrid GT2 tube and fin intercooler
1 × $799.99
Kinugawa Manual Boost Controller Elbow
1 × $29.99
Delta fin Intercooler - 550x140x65
1 × $389.00
Wheel spacer 5mm 4 / 5 stud multifit (each)
1 × $15.00
Dash mount triple gauge holder - 60mm
1 × $39.99
Simota breather filter - Urethane series 9mm neck
1 × $19.99
Delta fin Intercooler - 450x230x65
1 × $419.00
Delta fin Intercooler - 510x230x65
1 × $449.00
Turbo oil feed kit TD05/TD06 EVO 4-9 oil filter housing type - Kinugawa
1 × $142.99
Turbo oil return fitting kit TD04 TD05 TD06 Kinugawa onepiece
1 × $45.99
Kinugawa Japan TD04-12T 4cm 3-bolt 4D56T Pajero upgrade
1 × $1,450.00
Kinugawa Japan TD06SL2R-20g EVO4-9 - BALL BEARING + BILLET
1 × $2,299.00
DPR Intercooler V-mount for FD RX7
1 × $639.00
DPR intercooler piping kit for Toyota Celica GT4
1 × $649.00
Air filter adaptor Simota PA7
1 × $20.44
Air filter adaptor Simota PA10
1 × $20.44
Banjo fitting 7/16" to -4AN (Ball Bearing)
1 × $42.99
D1 Spec weighted shift knob rod style (black chrome)
1 × $79.99
Banjo fitting M14x1.5 to -6AN (Water feed)
1 × $45.99
Delta fin Intercooler - 510x140x65
1 × $385.00 Subtotal: $58,076.87
$99.99 Original price was: $99.99.$49.99Current price is: $49.99. Incl GST
In stock
This kit includes a stainless super V-band clamp and two v-band flanges. These are available in a range of sizes. Inside diameter of the flange in this kit measures 2.00″ / 52mm. Flange and clamps are stainless steel construction.
$39.99 – $59.99Price range: $39.99 through $59.99 Incl GST
$99.99 Original price was: $99.99.$49.99Current price is: $49.99. Incl GST

