This polyglycol based brake fluid vastly exceeds the highest DOT specs. For use in all systems that require a DOT 3, DOT 4 or DOT 5.1 fluid. With its very low viscosity, this brake fluid is specially designed for today’s newer ABS systems where a very thin fluid is needed to circulate in modern complex ABS systems with microvalves and anti-locking systems. Also for older, first generation ABS systems more sensitive to a brake fluid’s viscosity. A full synthetic based fluid that has unreal 509 degree dry boiling point, and similar 365 degree wet boiling point, it will outlast all normal Dot 3 and Dot 4 fluids easily. Each container is filled with nitrogen to increase the shelf life and eliminate contamination while factory sealed.

DPR S14 S15 R33 rear camber arms
Turbo oil feed kit TD05/TD06 EVO 4-9 oil filter housing type - Kinugawa
Motul oil 300V High RPM 0W20 2L
SD Rod End (chromolly, imperial) R/L
Bosch 1000cc injectors set (6) high impedence
Kinugawa Japan CT26 3SGTE SW20 ST185 60-1 upgrade kit
BC Camshafts VQ35 stage 2 / 3
Turbo beanie heatshield blanket - Titanium Series (T25 / T28)
RAGE exhaust system - Ford Falcon BA BF XR6 turbo
Bosch 850cc injectors set (4) high impedence
Radiator Cap - Violence - small head 1.3bar
SSQV flange - hose fit 25mm
Border coilovers - S1 street series
Turbosmart Kompact Plumb-Back BOV - Nissan
Redline water wetter - coolant 355ml
SR20 turbo dump pipe S13, S14 T25 atmos venting
Turbo oil feed kit Subaru TD05H TD06 AVCS KIT
Dobi Sport low / super low springs - full set 2wd
Downpipe RAGE - Subaru WRX 1994-2000 3"
Lucas 75w90 Synthetic Gear Oil 4.7L (trans and diff)
D2 upper mount (top hat) stud
Lucas Hot Rod and Classic engine oil 4.7L 